Button Belt T10 3040
Belt Dimensions 1. 304 Teeth
2. T10 (10MM) Pitch,
3. 3040 MM Pitch Length
4. 25MM Belt width
5. 84 Buttons on top side
HL Timing Belts
HL Timing Belts
Belt Dimensions
1. Pitch 9.525MM
2. Tooth H Type
3. SizesL 322 HL, 367 HL, 694 HL, 821 HL
Reiter C60 Belts
Reiter C60 Belts
Belt Dimensions 1. 291 Teeth
2. AT 10 Pitch (10MM)
3. 2910 MM Length
4. 25MM Belt Width
5. Top Side Studds as per image
6. PART NO. / CAT. NO. 10034747
Reiter Card Belts-1
Reiter Card Belts-1
Belt Dimensions 1. 3806.4MM Pitch Length
2. 25MM Belt Width
3. 104 Arc Profiles at one side
4. Colour - Blue
Reiter Card Belts-2
Reiter Card Belts-2
Belt Dimensions 1. 3806.4MM Pitch Length
2. 25MM Belt Width
3. 104 Arc Profiles at one side
4. 104 Flat Profiles on other side
5. Part No. 0245 – 2811, Cat. No. 014.056
6. Colour - Green
Spinning Ring Frame
Spinning Ring Frame Belts
Belt Dimensions 1. 1745 VY 62 28
2. 1810 VY 70 30
Variable Speed Belts
Variable Speed Belts
We require the following dimensions: 1. Out side Circumferance (OC) of belt.
2. Total Belt thickness (T).
3. Belt top width (W).
4. Belt Angle (if available) (A)
Our Production Range :
1. OC : 508mm – 1975mm
2. (T) : 6mm – 18mm
3. (W) : 13mm – 125mm
4. (A) : As per customer requirement.
The Above are only examplary representations of timing pulley
We can supply tapper lock Bush Pulleys as per customer requirments
Our Pulleys are well accepted OEM as well as End Users
Manufacturin of timing pulleys can only be undertaken after receipt of apporved drawing
In case if drawing is not available, we will submit our drawing for approval
The MAterial Composition of timing pulleys is generally aluminium, steel or cast iron.
We can also carry out designing od new timing belts drive system or conversition of frictional drive system as well as chain and gear drive system to timing belt drive system.
