Welcome to Apt Belts

Untitled Document

Untitled Document

SlideDeck v.1.3.2 Lite Example

Button Belts

Button Belt T10 3040 Belt Dimensions 1. 304 Teeth 2. T10 (10MM) Pitch, 3. 3040 MM Pitch Length 4. 25MM Belt width 5. 84 Buttons on top side

HL Timing Belts

HL Timing Belts

Belt Dimensions

1. Pitch 9.525MM
2. Tooth H Type
3. SizesL 322 HL, 367 HL, 694 HL,
821 HL

Reiter C60 Belts

Reiter C60 Belts

Belt Dimensions
1. 291 Teeth
2. AT 10 Pitch (10MM)
3. 2910 MM Length
4. 25MM Belt Width
5. Top Side Studds as per image
6. PART NO. / CAT. NO. 10034747

Reiter Card Belts-1

Reiter Card Belts-1

Belt Dimensions
1. 3806.4MM Pitch Length
2. 25MM Belt Width
3. 104 Arc Profiles at one side
4. Colour - Blue

Reiter Card Belts-2

Reiter Card Belts-2

Belt Dimensions
1. 3806.4MM Pitch Length
2. 25MM Belt Width
3. 104 Arc Profiles at one side
4. 104 Flat Profiles on other side
5. Part No. 0245 – 2811, Cat. No. 014.056
6. Colour - Green

Spinning Ring Frame

Spinning Ring Frame Belts

Belt Dimensions
1. 1745 VY 62 28
2. 1810 VY 70 30

Variable Speed Belts

Variable Speed Belts

We require the following dimensions:
1. Out side Circumferance (OC) of belt.
2. Total Belt thickness (T).
3. Belt top width (W).
4. Belt Angle (if available) (A)

Our Production Range :
1. OC : 508mm – 1975mm
2. (T) : 6mm – 18mm
3. (W) : 13mm – 125mm
4. (A) : As per customer requirement.

Untitled Document

Untitled Document

Timing Belt Drive

Rubber Timing Belts

P.U. Timing Belts

Double Sided Timing Belts

Open End Timing Belts

Special Timing Belts

Timing Belt Conveyors

Untitled Document


Rubber Timing Belts
Inch	MXL	XL	L	H	XH	XXH
HTD	2m	3m	5m	8m	14m
STS	S2m	S3m	S4.5m	S5M	S8m	S14m
RPP	2m	3m	5m	8m	14m
T	T2.5	T5	T10	T20
AT	AT5	AT10	AT20
RHP	8m	14m
P.U. Timing Belts
INCH	XL	L	H
T	T2.5	T5	T10	T20
AT	AT5	AT10	AT20

OEM / Dealer Support

---------------------------------------------------------------------------------------------------------------------------------

For Original Equipment/ Machinery Manufacturers, we are pleased to provide our assistance in the following areas

1. Designing of NEW TIMING BELT Drive System

2. Conversion from Normal Belt Drive to Timing Belt Drive System

3. Conversion from Chain / Gear Drive to Timing Belt Drive System

4. Problem solving in current drive sytems

---------------------------------------------------------------------------------------------------------------------------------

Kindly fill the form as below giving as much information as possible and send us by email / fax

Client Name :
Contact Person:
Contact Number :
Address :

Drivers Details :

Types and Description:
Rated HP :	OR
Torque (Lb-Ln) :
Roated Constant Speed :
If Variable Speed :	Minrpm
If Variable Speed :	Maxrpm
Shaft Dia :
Lenth :
Key way width :
Key Way Depth :
Set Screw :
Pulley Max OD :
Pulley Max Width : (Including HUB)

Driven Machine Details :

Types and Description:
Types of Load :	Uniform Light Shock
	Medium Shock Heavy Shock
Peak HP :	OR
Torque (Lb-Ln) :
Roated Constant Speed :
If Variable Speed :	Minrpm
If Variable Speed :	Maxrpm
Shaft Dia :
Lenth :
Key way width :
Key Way Depth :
Set Screw :
Pulley Max OD :
Pulley Max Width : (Including HUB)

Center Distance Details :

Minimum Required :
Maximum Allowed :
Types of Adjustments :	Adjustable Base None
Idler Pullery	None Inside Outside
	Slackside Tightside Diameter

Special Considaration :

Approax hour of Operation Per Day :
Abnormal Tempratures :
Excess : Oil Dust water Abrasive Static
Starting Method : Clutch Noload
Operation : Frequent Stop & Start Load Revesals Other

---------------------------------------------------------------------------------------------------------------------------------

Untitled Document

copyright@2011, Aptbelts.com

designed and developed by

WebGyor Technologies